Puzzi 30/4 · Large-capacity spray extractor

The product in detail

The Puzzi 30/4 extends capacity beyond a small extractor with 30 L clean water, a 350 mm floor head and 4 m hose. Wastewater collects in a removable 15 L recovery tank. Large wheels and an EASY Operation selector support movement and setup on large compatible textile areas.

Listed specifications

Values come from the supplier documentation consulted. Performance depends on conditions and configuration. The supplied reference’s container or nameplate and manual determine its use.

Surfaces and compatibility

For carpets and textiles whose fibres, backing and installation permit spray extraction. An approved upholstery or stair tool may extend the applications when suitable for both machine and textile.

Tank volumes differ: the recovery tank may need emptying before the clean tank is exhausted. The description lists 66 dB(A); sound comparisons require matching measurement conditions.

Preparation and use

1. Dry vacuum, identify stains and clear the area. Test colourfastness.
2. Inspect the cord, seals, hoses, filters and tank levels.
3. Select detergent, temperature and attachments according to the textile, chemical and machine instructions.
4. Use consistent passes. Avoid unnecessary rewetting and perform the specified recovery passes.
5. Monitor tank level and foam during operation. Allow complete drying before returning the area to use.

Care and storage

After use, empty and rinse tanks, clean jets and remove fibres from the head. Flush the circuit as instructed, inspect seals and dry components as prescribed before storage. Unplug before maintenance.

Limits and things to check

Higher pressure alone does not guarantee better cleaning: recovery, flow, textile and technique also matter. Weak suction may result from a full tank, misplaced seal or blocked hose. Drying time cannot be guaranteed by the model alone.

Equipment, accessories and options

The page lists a 4 m hose, 350 mm nozzle, trigger and 700 mm stainless wand. A socket supports a compatible PW 30/1 head; inclusion is not established.

Practical questions