BD 50/50 C Bp Classic · Disc auto-scrubber

The product in detail

The BD 50/50 C Bp Classic is a battery walk-behind disc scrubber. Brush rotation assists movement; it should not be confused with a separate traction-motor version. Listed volumes are 52 L clean and 51 L recovery, with a V-shaped squeegee.

Listed specifications

Values come from the supplier documentation consulted. Performance depends on conditions and configuration. The supplied reference’s container or nameplate and manual determine its use.

Surfaces and compatibility

For hard floors that permit machine scrubbing and water recovery. Identify the covering, finish, joints and level changes before choosing a brush or pad.

The table lists 24 V / 105 Ah and up to 3 h. That does not prove the base reference includes battery and charger. Listed turning aisle width is 1,240 mm.

Preparation and use

1. Remove large loose debris and clear the route. Mark the work area.
2. Inspect brushes, squeegee blades, filters, tanks and power supply.
3. Fit approved consumables and dose a cleaner compatible with floor and machine.
4. Test suitable settings. Monitor scrubbing and water recovery, particularly when turning.
5. Empty the recovery tank before it overfills and inspect results after drying.

Care and storage

Rinse tanks and filters as instructed. Clear debris from blades and brushes and check wear. For battery models, follow the specified charger, ventilation and charging cycle. Inspect and store cords on mains models.

Limits and things to check

Cleaning width is not always overall width: measure the squeegee, turns and doorways too. Actual output includes filling, emptying, obstacles and travel. Water streaks call first for checking blades, hose and tank.

Equipment, accessories and options

The page lists a disc brush and V-shaped squeegee. AGM or wet-battery packages with pad driver also have separate order references: request quote details.

Practical questions