Kärcher · Floor machines and burnishers
BDS 43/Orbital C Spray · Orbital floor machine
Reference 1.291-254.0
Orbital head with integrated spray for scrubbing compatible floors. Match the pad and solution to the task.
- Reference
- 1.291-254.0
- Brand
- Kärcher
- Category
- Floor machines and burnishers
Hover to explore depth. Zoom, then drag to inspect a detail. Keyboard: +, −, arrows and 0.
Product photograph. Other sides are not available.
The product in detail
The BDS 43/Orbital C Spray is an orbital floor machine with integrated spray for permitted tasks on compatible floors. Compare it according to pad, chemical and intended scrubbing work. The Canadian reference is listed for single-phase 120 V / 60 Hz power.
Listed specifications
Values come from the supplier documentation consulted. Performance depends on conditions and configuration. The supplied reference’s container or nameplate and manual determine its use.
| Specification | Listed value or configuration |
|---|---|
| Phase count (Ph) | 1 |
| Voltage (V) | 120 |
| Frequency ( Hz ) | 60 |
| Weight (avec accessoire) (kg) | 60 |
| Dimensions (L × W × H) (mm) | 1020 x 520 x 380 |
| Listed weight with accessory | 60 kg |
Surfaces and compatibility
For scrubbing, maintenance or polishing explicitly permitted for the combination of floor, finish, machine, pad and chemical. Speed and orbital or rotary motion affect consumable selection.
The table lists 60 kg with accessory. Distinguish this from empty weight when planning transport and handling.
Preparation and use
- Identify the task and remove loose debris.
- With power disconnected, fit a pad driver, pad or brush of the correct size and attachment.
- Adjust the handle and inspect the cord, safety controls and work area.
- Test the specified speed and chemical on a small area; keep the machine moving as instructed.
- Recover solution by the planned method if the machine has no suction. Inspect the dry result.
Care and storage
Disconnect power before removing consumables. Clean pads, inspect the driver and dry parts. Store without compressing the brush or pad if instructed. A loaded pad can cause marks and uneven results.
Limits and things to check
A floor machine or burnisher does not necessarily have a recovery system. Pad colour alone does not establish compatibility; verify reference, abrasiveness and permitted speed.
Equipment, accessories and options
Request details of driver, pads, tank or spray system and cord. Listed accessory products are not automatically included.
Practical questions
How do I check this reference suits my floor?
Identify flooring, finish and task, then check both product and flooring instructions. A hidden-area test should reproduce full application and drying. For equipment, also check tools or pads, dimensions and power supply.
Are all accessories and consumables included?
Request details of driver, pads, tank or spray system and cord. Listed accessory products are not automatically included.
What information is still needed before purchasing?
Confirm orbital frequency, actual width, pressure, cord length and consumables.
Why might results differ from the listed output?
Figures describe different things: working path, theoretical or practical output, power and runtime by mode. Filling, emptying, charging, obstacles, consumable condition and technique influence actual work completed.
