ATTIX 44-2L IC

The product in detail

This ATTIX 44-2L IC is the European 230 V version, reference 107412106. It has a 42 L tank, PTFE filter and automatic InfiniClean. This page explains the configuration; a Canadian purchase requires validation of the local variant and power supply before ordering.

Listed specifications

Values come from the supplier documentation consulted. Performance depends on conditions and configuration. The supplied reference’s container or nameplate and manual determine its use.

Surfaces and compatibility

For dry debris or liquids only in applications approved for this variant. Identify the material and required filters, bags and tools before changing modes.

The variant name lists 50 Hz while the family table displays 50–60 Hz. The plate, certification and electrical requirements of the model offered in Canada must govern.

Preparation and use

1. Check the material against the manual’s permitted applications and limits.
2. Fit the filter, any required bag and the tool specified for the chosen mode.
3. Inspect the float or level system, hose and lid seal.
4. Monitor filling and stop according to the machine procedure.
5. Dispose of contents using the appropriate route for the liquid or dust, then prepare for the next use.

Care and storage

Empty and clean the tank, inspect the filter and dry components as instructed before dry pickup. Automatic filter cleaning does not replace inspection or replacement when worn.

Limits and things to check

A wet/dry tank does not permit every liquid, fine dust or combustible material. Dust classes, certifications and antistatic systems apply to the complete configuration. Have specialized applications verified.

Equipment, accessories and options

The page also shows 120 V and HEPA variants under other references. Request a complete local equivalent rather than swapping only a filter or cord.

Practical questions