VP300 HEPA C US

The product in detail

The Nilfisk VP300 HEPA C US is a dry canister vacuum for daily cleaning. Configuration 107421148 lists HEPA 14 as its main filter. The D32 accessory system supports choosing a floor head or edge tool; convenient bag and filter access is useful for fleet maintenance.

Listed specifications

Values come from the supplier documentation consulted. Performance depends on conditions and configuration. The supplied reference’s container or nameplate and manual determine its use.

Surfaces and compatibility

For ordinary dry dust and debris with a head suited to hard floors or carpet. On delicate floors, check wheel and bristle cleanliness. On carpet, verify whether a rotating brush is permitted.

The page uses metric headings with some imperial values. Units are explicit here to avoid confusing 33 ft with 33 m or 11 lb with 11 kg.

Preparation and use

1. Check the bag, filters, hose and power connection or battery before starting.
2. Choose the correct head and adjust brush and height if available.
3. On backpack models, fit the harness before working and plan the cord route.
4. Vacuum in regular strips, then use the appropriate attachment along edges.
5. Stop if airflow drops or unusual noise develops; disconnect power before clearing obstructions.

Care and storage

Replace the bag before it becomes overfilled and follow each filter’s instructions: some are replaced, others cleaned. Do not wash filters without approval. Remove hair from brushes and store the hose without sharp bends.

Limits and things to check

A HEPA filter does not establish approval for hazardous dust, combustible dust or liquids. Nominal bag volume does not give equal usable capacity for all debris. Check replacement bag references and costs before purchase.

Equipment, accessories and options

The page shows H14 filter 107421443, bags and several D32 heads. Request the reference-specific included list; displayed accessories are also sold separately.

Practical questions