Saturn two-speed floor machine

The product in detail

The two-speed EDIC Saturn provides low-speed rotation at 180 rpm and high-speed rotation at 320 rpm. Its nominal 20 in width is suited to comparison for open areas. Speed selection depends on finish, pad and desired result. An adjustable handle, bumper and stainless cover are among the supplier’s listed features.

Listed specifications

Values come from the supplier documentation consulted. Performance depends on conditions and configuration. The supplied reference’s container or nameplate and manual determine its use.

Surfaces and compatibility

For scrubbing, maintenance or polishing explicitly permitted for the combination of floor, finish, machine, pad and chemical. Speed and orbital or rotary motion affect consumable selection.

At 320 rpm on its high setting, this machine should not be treated as a 1,500 rpm burnisher. Permitted chemicals, pads and methods can differ.

Preparation and use

1. Identify the task and remove loose debris.
2. With power disconnected, fit a pad driver, pad or brush of the correct size and attachment.
3. Adjust the handle and inspect the cord, safety controls and work area.
4. Test the specified speed and chemical on a small area; keep the machine moving as instructed.
5. Recover solution by the planned method if the machine has no suction. Inspect the dry result.

Care and storage

Disconnect power before removing consumables. Clean pads, inspect the driver and dry parts. Store without compressing the brush or pad if instructed. A loaded pad can cause marks and uneven results.

Limits and things to check

A floor machine or burnisher does not necessarily have a recovery system. Pad colour alone does not establish compatibility; verify reference, abrasiveness and permitted speed.

Equipment, accessories and options

A pad driver is listed in the contents. The ED390AC tank and pads appear as associated products; confirm their inclusion separately.

Practical questions