Attax Pro · Carpet care chemicals
Carpet extractor detergent
Reference ATX5471G
For hot-water extraction with a compatible machine and carpet. Follow the specified dilution.
- Reference
- ATX5471G
- Brand
- Attax Pro
- Category
- Carpet care chemicals
- Model information
- 4 L
Hover to explore depth. Zoom, then drag to inspect a detail. Keyboard: +, −, arrows and 0.
Product photograph. Other sides are not available.
The product in detail
Attax Pro ATX5471G is designed for hot-water extraction with compatible equipment and textiles. The supplier describes a formula combining cleaning, spot removal, foam control, deodorizing and a stain-protection agent. Evaluate these listed functions against the instructions; they do not eliminate the need for pre-vacuuming and thorough solution recovery.
Helps loosen soil between fibres. Suction removes the dirty solution and reduces moisture left in the carpet.
Listed specifications
Values come from the supplier documentation consulted. Performance depends on conditions and configuration. The supplied reference’s container or nameplate and manual determine its use.
| Specification | Listed value or configuration |
|---|---|
| Container | 4 L |
| Intended method | Hot-water extraction |
Surfaces and compatibility
For carpet and textiles that permit wet cleaning and the selected detergent. Check fibres, dyes, backing, adhesive and extractor attachments.
The commercial phrase “steam extraction” does not establish suitability for a steam cleaner. Verify the temperature permitted for textile and machine.
Preparation and use
Vacuum first. Follow the dose and temperature allowed by the label, extractor and carpet. Limit wet passes and recover the water thoroughly.
- Vacuum thoroughly and treat spots with a compatible method.
- Check dilution, maximum temperature and filling instructions on the label and machine manual.
- Test colour and backing. Measure the amount of solution required.
- Make the specified injection and recovery passes while limiting wetting.
- Follow any rinsing, complete drying and final vacuuming requirements.
Follow the supplied reference’s label and SDS, plus flooring and machine instructions. Do not mix products. The method guidance below complements manuals and does not set a dilution or contact time missing from them.
Care and storage
Empty and rinse tanks and the circuit as directed by the extractor manual. Remove fibres from the tool. Keep traffic off the area while it dries and check for sticky residue.
Limits and things to check
Do not transfer dosing instructions between products. Detergent cannot make a textile suitable for wet cleaning. Drying also depends on backing, water loading and ventilation.
Equipment, accessories and options
Compatible spray extractor, measuring device and tool suited to the textile.
Practical questions
How do I check this reference suits my floor?
Identify flooring, finish and task, then check both product and flooring instructions. A hidden-area test should reproduce full application and drying. For equipment, also check tools or pads, dimensions and power supply.
Are all accessories and consumables included?
Compatible spray extractor, measuring device and tool suited to the textile.
What information is still needed before purchasing?
Confirm dilution, temperature, rinsing and the scope of stain protection in the instructions.
In the same selection
Attax Pro
Carpet spot remover
For treating a single spot. Test a hidden area according to the product and carpet fibre instructions.
Explore this product ↗
Attax Pro
Extractor defoamer
Controls excess foam in the recovery system. Follow the instructions for both the extractor and the product.
Explore this product ↗
Attax Pro
Dry-foam carpet shampoo
For dry-foam cleaning on compatible carpets. Vacuum away the dried foam as directed.
Explore this product ↗