Ceramax tile and grout cleaner

The product in detail

Sanygam Ceramax targets ceramic tile and grout. Supplier reference SS5454 corresponds to manufacturer number 195301 in a 1 L container. That specific purpose distinguishes targeted grout cleaning from general mopping. Before treating tile edges, identify grout, sealers and adjacent materials.

Loosens surface dirt from grout and tile. A crack or discoloration within the grout needs a different diagnosis.

Listed specifications

Values come from the supplier documentation consulted. Performance depends on conditions and configuration. The supplied reference’s container or nameplate and manual determine its use.

Surfaces and compatibility

For routine care of hard flooring whose covering and finish permit this cleaner. Identify neighbouring materials too: wood trim, natural stone and grout may require a different method.

Composition and pH are not specified on the consulted page. Do not infer suitability for marble, limestone or metal. Coloured or sealed grout requires separate approval.

Preparation and use

Identify the tile, grout and adjoining materials. Test in a hidden area and follow the label for agitation, recovery and rinsing.

1. Vacuum or sweep grit and loose debris so the mop does not drag them across the floor.
2. Read the label on the supplied reference. Use only the stated dilution; ready-to-use products and concentrates require different preparation.
3. Test an inconspicuous area and allow it to dry before checking colour, sheen and texture.
4. Work in small areas with a clean microfibre pad or approved equipment. Recover dirty water and rinse as instructed.
5. Allow the floor to dry before reopening the area. If haze appears, check dosing and pad cleanliness.

Care and storage

Launder microfibre pads according to their instructions and keep a clean spare. Store the product in its labelled, closed container under the label conditions. Dirty solution or a saturated pad can redistribute soil.

Limits and things to check

A maintenance cleaner does not replace a stripper, finish or disinfectant. pH and a “neutral” description alone do not establish compatibility with every material. Do not mix in other products.

Equipment, accessories and options

Plan for a non-metal brush suited to the grout, a measuring device if required and recovery cloths.

Practical questions