EDIC · Carpet and rug equipment
Polaris self-contained carpet extractor
Reference ED1201PS
A built-in brush agitates soil during extraction. Its cleaning width is useful in carpeted corridors and rooms.
- Reference
- ED1201PS
- Brand
- EDIC
- Category
- Carpet and rug equipment
- Model information
- 48 cm / 19 in
Hover to explore depth. Zoom, then drag to inspect a detail. Keyboard: +, −, arrows and 0.
Product photograph. Other sides are not available.
The product in detail
The EDIC Polaris 1201PS is a 19 in self-contained extractor with an integrated brush and a listed 12 gal solution tank. Its removable tank, adjustable handle and four non-marking wheels help with setup and moving between areas. It targets carpet that permits mechanical agitation and wet extraction.
Listed specifications
Values come from the supplier documentation consulted. Performance depends on conditions and configuration. The supplied reference’s container or nameplate and manual determine its use.
| Specification | Listed value or configuration |
|---|---|
| Airflow (cfm) | 200 |
| Solution tank | 12 gal |
| Brush pattern | Chevron |
| Cleaning width | 19" |
| Power cord | 50' detachable |
| Construction | Polyethylene |
| Current | 15 A |
Surfaces and compatibility
For carpets and textiles whose fibres, backing and installation permit spray extraction. An approved upholstery or stair tool may extend the applications when suitable for both machine and textile.
The supplier page lists 120 psi in the title and 100 psi in the description and table. It also gives 4,200 and 2,100 rpm in different places. Confirm pressure and speed for the supplied version.
Preparation and use
- Dry vacuum, identify stains and clear the area. Test colourfastness.
- Inspect the cord, seals, hoses, filters and tank levels.
- Select detergent, temperature and attachments according to the textile, chemical and machine instructions.
- Use consistent passes. Avoid unnecessary rewetting and perform the specified recovery passes.
- Monitor tank level and foam during operation. Allow complete drying before returning the area to use.
Care and storage
After use, empty and rinse tanks, clean jets and remove fibres from the head. Flush the circuit as instructed, inspect seals and dry components as prescribed before storage. Unplug before maintenance.
Limits and things to check
Higher pressure alone does not guarantee better cleaning: recovery, flow, textile and technique also matter. Weak suction may result from a full tank, misplaced seal or blocked hose. Drying time cannot be guaranteed by the model alone.
Equipment, accessories and options
Upholstery and stair tools and hoses are listed as optional accessories. Confirm the brush and supplied contents.
Practical questions
How do I check this reference suits my floor?
Identify flooring, finish and task, then check both product and flooring instructions. A hidden-area test should reproduce full application and drying. For equipment, also check tools or pads, dimensions and power supply.
Are all accessories and consumables included?
Upholstery and stair tools and hoses are listed as optional accessories. Confirm the brush and supplied contents.
What information is still needed before purchasing?
Verify pressure, brush speed, recovery capacity and applicable warranty before ordering.
Why might results differ from the listed output?
Figures describe different things: working path, theoretical or practical output, power and runtime by mode. Filling, emptying, charging, obstacles, consumable condition and technique influence actual work completed.
In the same selection
EDIC
FiveStar extractor
A compact self-contained extractor for compatible carpets, with a built-in brush to loosen dirt.
Explore this product ↗
EDIC
500BX-HR extractor
A carpet extractor with a 120 psi pump. Compare attachments, hose reach and fibre care instructions before choosing.
Explore this product ↗
Bissell
BG10 carpet extractor
Two motors and separate tanks for extraction cleaning on compatible carpets.
Explore this product ↗