EDIC · Carpet and rug equipment
Galaxy 2000SX-HR carpet extractor
Reference ED2000SX
For deep cleaning compatible carpet. The machine has separate solution and recovery tanks. Johnny Vac lists this reference as the machine only.
- Reference
- ED2000SX
- Brand
- EDIC
- Category
- Carpet and rug equipment
Hover to explore depth. Zoom, then drag to inspect a detail. Keyboard: +, −, arrows and 0.
Product photograph. Other sides are not available.
The product in detail
The EDIC Galaxy 2000SX-HR is a portable extractor with two two-stage vacuum motors and separate 12 and 11 gal tanks. Front casters, large rear wheels and a detachable cord help relocate the work station. The consulted page explicitly lists ED2000SX as the machine only.
Listed specifications
Values come from the supplier documentation consulted. Performance depends on conditions and configuration. The supplied reference’s container or nameplate and manual determine its use.
| Specification | Listed value or configuration |
|---|---|
| Pump pressure (psi) | 120 |
| Water lift | 150" |
| Clean-water tank | 12 gal |
| Recovery tank | 11 gal |
| Motors | Deux, "2-stage" |
| Dimensions | 35″ H x 31″ L x 18″ L |
| Power cord | 50' detachable |
| Weight | 78 lb |
| Current | 13.5 A |
Surfaces and compatibility
For carpets and textiles whose fibres, backing and installation permit spray extraction. An approved upholstery or stair tool may extend the applications when suitable for both machine and textile.
The current title and table list 120 psi, while the historic page address includes “100 psi”. Confirm configuration against the supplied machine’s plate and documentation.
Preparation and use
- Dry vacuum, identify stains and clear the area. Test colourfastness.
- Inspect the cord, seals, hoses, filters and tank levels.
- Select detergent, temperature and attachments according to the textile, chemical and machine instructions.
- Use consistent passes. Avoid unnecessary rewetting and perform the specified recovery passes.
- Monitor tank level and foam during operation. Allow complete drying before returning the area to use.
Care and storage
After use, empty and rinse tanks, clean jets and remove fibres from the head. Flush the circuit as instructed, inspect seals and dry components as prescribed before storage. Unplug before maintenance.
Limits and things to check
Higher pressure alone does not guarantee better cleaning: recovery, flow, textile and technique also matter. Weak suction may result from a full tank, misplaced seal or blocked hose. Drying time cannot be guaranteed by the model alone.
Equipment, accessories and options
Do not assume the wand, hoses or upholstery tool are included. The compatible Galaxy heater is optional and sold separately.
Practical questions
How do I check this reference suits my floor?
Identify flooring, finish and task, then check both product and flooring instructions. A hidden-area test should reproduce full application and drying. For equipment, also check tools or pads, dimensions and power supply.
Are all accessories and consumables included?
Do not assume the wand, hoses or upholstery tool are included. The compatible Galaxy heater is optional and sold separately.
What information is still needed before purchasing?
Detail the accessories required for operation, any heater, power requirements and warranty in the quote.
Why might results differ from the listed output?
Figures describe different things: working path, theoretical or practical output, power and runtime by mode. Filling, emptying, charging, obstacles, consumable condition and technique influence actual work completed.
In the same selection
EDIC
FiveStar extractor
A compact self-contained extractor for compatible carpets, with a built-in brush to loosen dirt.
Explore this product ↗
EDIC
500BX-HR extractor
A carpet extractor with a 120 psi pump. Compare attachments, hose reach and fibre care instructions before choosing.
Explore this product ↗
Bissell
BG10 carpet extractor
Two motors and separate tanks for extraction cleaning on compatible carpets.
Explore this product ↗