500BX-HR extractor

The product in detail

The Galaxy 500BX-HR is a portable hose extractor with separate 19 L solution and 15 L recovery tanks. Front swivel wheels and an adjustable handle help it move between rooms. Its heat-ready configuration permits adding a compatible external heater, subject to the electrical circuit and selected equipment.

Listed specifications

Values come from the supplier documentation consulted. Performance depends on conditions and configuration. The supplied reference’s container or nameplate and manual determine its use.

Surfaces and compatibility

For carpets and textiles whose fibres, backing and installation permit spray extraction. An approved upholstery or stair tool may extend the applications when suitable for both machine and textile.

The page lists a 120 psi pump and 136 in water lift. Its sales paragraph also uses the designation ED508BXHR: verify 500BX-HR on the machine nameplate.

Preparation and use

1. Dry vacuum, identify stains and clear the area. Test colourfastness.
2. Inspect the cord, seals, hoses, filters and tank levels.
3. Select detergent, temperature and attachments according to the textile, chemical and machine instructions.
4. Use consistent passes. Avoid unnecessary rewetting and perform the specified recovery passes.
5. Monitor tank level and foam during operation. Allow complete drying before returning the area to use.

Care and storage

After use, empty and rinse tanks, clean jets and remove fibres from the head. Flush the circuit as instructed, inspect seals and dry components as prescribed before storage. Unplug before maintenance.

Limits and things to check

Higher pressure alone does not guarantee better cleaning: recovery, flow, textile and technique also matter. Weak suction may result from a full tank, misplaced seal or blocked hose. Drying time cannot be guaranteed by the model alone.

Equipment, accessories and options

Pressure hose, wand, upholstery tool and heater appear as accessories or options. Request the exact contents of the ordered package rather than assuming inclusion.

Practical questions