TP46 orbital floor machine

The product in detail

The TMB TP46 sold as JVTP43 combines listed 180 rpm disc rotation with orbital movement. Its 15 L tank feeds solution beneath the brush. The supplier emphasizes stability and distributed pad contact; time or water savings should be assessed on your own floor.

Listed specifications

Values come from the supplier documentation consulted. Performance depends on conditions and configuration. The supplied reference’s container or nameplate and manual determine its use.

Surfaces and compatibility

For scrubbing, maintenance or polishing explicitly permitted for the combination of floor, finish, machine, pad and chemical. Speed and orbital or rotary motion affect consumable selection.

Orbital movement does not eliminate the need to match abrasiveness and chemical to the finish. Plan separate recovery if the task produces dirty solution.

Preparation and use

1. Identify the task and remove loose debris.
2. With power disconnected, fit a pad driver, pad or brush of the correct size and attachment.
3. Adjust the handle and inspect the cord, safety controls and work area.
4. Test the specified speed and chemical on a small area; keep the machine moving as instructed.
5. Recover solution by the planned method if the machine has no suction. Inspect the dry result.

Care and storage

Disconnect power before removing consumables. Clean pads, inspect the driver and dry parts. Store without compressing the brush or pad if instructed. A loaded pad can cause marks and uneven results.

Limits and things to check

A floor machine or burnisher does not necessarily have a recovery system. Pad colour alone does not establish compatibility; verify reference, abrasiveness and permitted speed.

Equipment, accessories and options

The page lists an adjustable handle, 6 in non-marking wheels, tank, pad driver and 50 ft cord. Carpet cleaning requires a suitable pad and separate approval.

Practical questions