Acrylic floor finish

The product in detail

Attax Pro ATX25G is a metal-interlocked acrylic polymer floor finish listed at 25%. It forms a maintenance film on a prepared compatible substrate. Selection should account for flooring, existing system, desired sheen and the future washing and polishing routine. Application requires a clean surface and planned drying between coats.

The polymers dry into a wear layer. Stripper residue or overly thick coats can affect adhesion and evenness.

Listed specifications

Values come from the supplier documentation consulted. Performance depends on conditions and configuration. The supplied reference’s container or nameplate and manual determine its use.

Surfaces and compatibility

For surfaces whose manufacturer permits this exact finish or refresher. Identify the existing system, wear level and desired sheen: acrylic finish and polyurethane refresher serve different purposes.

The 25% figure does not give coat count or coverage. Despite the supplier title’s use of “concentrate”, do not dilute this finish without explicit label instructions.

Preparation and use

Use a dedicated finish applicator on an approved, clean, dry and prepared floor. Follow the label for coats, drying and reopening the area.

1. Remove soil and prepare the substrate according to the finish system; strip only if the procedure calls for it.
2. Allow the substrate to dry and check for cleaner residue.
3. Test a hidden area for adhesion and sheen change.
4. Apply evenly with the recommended applicator. Follow the stated coat count and thickness.
5. Observe intervals between coats and before traffic, washing or polishing.

Care and storage

Use a maintenance routine compatible with the applied film. Keep applicators clean and separate from stripping pads. Check the required preparation for recoating to prevent visible transitions.

Limits and things to check

Finish may change sheen and traction. It does not repair deep scratches, raised boards or a damaged substrate. Touch-dry time is not necessarily the full return-to-service time.

Equipment, accessories and options

Plan for a clean finish applicator, floor preparation and downtime. Application consumables are not included with the container.

Practical questions